可膨胀石墨阻燃高回弹聚氨酯泡沫塑料的性能

在原料中添加可膨胀石墨(EG),采用一步法合成了阻燃型高回弹聚氨酯软泡,研究了EG对泡沫性能的影响.用扫描电镜和光学显微镜观察了EG粒子在泡沫内的固着状态及其对泡孔形貌和泡沫燃烧后的炭层形貌的影响.垂直-水平燃烧实验和极限氧指数实验检测了EG的添加量对于泡沫燃烧的抑制情况.考察了EG粒子的含量对泡沫密度、拉伸及压缩力学...     

特种泡沫塑料的动态力学性能研究

通过大尺寸分离式Hopkinson压杆对特种泡沫塑料进行了高应变率冲击实验，完整地给出了该材料在高应变率下的动态应力应变曲线，并将结果和理论上的Eyring模型进行了比较，指出了这种材料在一定的应变率范围内，具有明显的应变率效应，同时从应力应变曲线的特点来看，这种材料又有良好的吸能特性，最后通过对实验数据的拟合，提出了便于工程应用的动态本构方程。     

Dynamic and Quasi-Static Propagation of Compaction Waves in a Low-Density Epoxy Foam

We conducted dynamic and quasi-static compression experiments with low-density (ρ = 120 kg/m³) epoxy foam specimens. The specimens had a 10.0-mm-square cross-section and a length of 19.3 mm. Dynamic experiments were conducted with a modified split Hopkinson pressure bar (SHPB), and the quasi-static experiments were conducted with a hydraulic load frame device (MTS-810). In both cases, the specimens were loaded from one end at a constant velocity. Equally spaced grid lines were marked on the specimens to monitor the deformation history. Digital images taken at equally spaced time intervals gave the positions of each grid line. These images showed that a constant end-face velocity V produced a compaction wave front that traveled at a constant velocity C in both dynamic and quasi-static experiments. We described these results with a shockwave analysis that used a locking solid material model.     

聚氨酯泡沫塑料压缩杨氏模量的理论预测

通过微分法导出了泡沫塑料剪切模量和体积模量所满足的微分方程组，再利用联系泡沫塑料泊松比和孔隙比的Ｋｅｒｎｅｒ－Ｒｕｓｃｈ经验关系及泡沫塑料弹性常数间满足足的关系，在基体材料不可压缩的假设下，确定了泡沫塑料的杨氏模量。本文针对几种密度的泡沫塑料，分别对它们的杨氏模量进行了理论预测和实验测定，结果表明：理论预测的模量在较高密度下与实验符合的很好，在低密度下也给出相当好的近似值。此外，本文的结果同其他理     

PVDF压电薄膜在应力波测量中的应用

综合介绍了PVDF压力传感器的测试原理、动态标定实验，并采用定制的PVDF压力传感器测量了不同类型分层介质在冲击载荷作用下的压力衰减，说明了PVDF压力传感器在压力测量中有着很好的前景．     

基于相对即时密度的泡沫铝材料力学性能研究

通过对圆柱形泡沫铝试件进行静态压缩和冲击实验，考察了泡沫铝的初始密度、孔径和尺寸等因素对材料应力应变关系的影响，研究了基于相对即时密度的泡沫铝材料的塑性行为。实验所用泡沫铝试件包含四种尺寸，三种孔径及多种初始密度。实验结果表明，初始密度对泡沫铝的应力应变关系有着显著的影响，而其他因素，如孔径、试件尺寸等的影响较小。基于实验结果，提出了一种新的泡沫铝材料力学性能的描述方法，即用材料的相对即时密度与应力的关系来描述泡沫铝材料的塑性行为。该关系适用于静态和动态加载情况，只是两种情况下的参数不同。基于该方法，发现泡沫铝的塑性行为可以用单一的应力一相对即时密度关系描述，这一关系甚至不依赖于材料的初始密度，这将使泡沫铝材料塑性行为的描述大大简化。     

液态金属熔池中气泡-液体两相湍流的数值模拟研究

应用欧拉-欧拉双流体模型,以及分别描述气泡和液体湍流的两相湍流模型,描述液态金属中气体射流发泡过程的两相流动及气泡分布。与实验结果的对比表明,本模型的预测能力优于前人未考虑气相湍流的模型。考查了液体物性和气泡尺寸对流场特性的影响,结果发现,液体密度越低,气泡尺寸越小,气泡分布就越均匀。     

泡沫铝合金填充圆管三点弯曲实验研究

用实验方法研究了三种不同管壁厚度、两种跨径的泡沫铝合金填充圆管的三点弯曲力学性能,得到了泡沫铝合金填充管结构承载过程中的三种变形模式,即压入、压入弯曲和管壁下缘拉裂破坏。给出了空管和泡沫铝合金填充管的载荷位移曲线,并进行了比较。实验发现泡沫铝合金填充管结构的承载能力随泡沫铝合金密度的增大而增大,但破坏应变则随之减小。结构承载力的相对提高量随着管壁厚度的减小和跨径的增大而增大。此外,分析了泡沫铝合金提高填充管结构承载能力的机理。泡沫铝合金填充使管壁压入量和管截面抗弯刚度的损失显著减小,从而提高了结构的抗弯能力。     

生物矿化法制备HgS/聚氨酯复合薄膜及其对Ba2+的传感性能

通过生物矿化法制备出HgS/聚氨酯纳米复合材料并用FTIR、SEM等对材料进行了表征. 研究发现聚氨酯分子可以控制HgS的成核和晶体生长. 聚氨酯的量子限域效应已通过紫外-可见光谱证实,在约291 nm处有明显的特征吸收峰. 荧光性能研究结果表明HgS/聚氨酯纳米粒子复合薄膜对Ba²⁺的存在十分敏感,少量的Ba²⁺会使荧光强度明显上升,水中常见离子几乎对此没有影响.     

Experimental Validation of the Temperature-Resistant and Salt-Tolerant Xanthan Enhanced Foam for Enhancing Oil Recovery

Xanthan enhanced foam (XGF) is a newly developed chemical agent for enhanced oil recovery in high-temperature and high-salinity reservoirs. In this paper, laboratory experiments were performed to characterize the morphology and foam properties of XGF, to study its performance under different temperature and different salinity conditions, respectively. Based on simulate reservoir formation conditions of Xidaliya field, a series of research on XGF were conducted. The experimental results showed that the scanning electron microscopy of XGF reflected a more viscoelastic and stable nature of the foam system. High temperature had a great adverse impact upon the stability of XGF, and the increase of salinity in the solution helped to improve the stability of foam. The foam stability increased remarkably when XG4 is added, and an increase in ambient pressure made enhancement of foam stability became more noticeable. In the presence of crude oil, Xanthan could enhance the stability of emulsions and was more favorable to stabilize foam. XG4 enhanced foam had dramatic properties for mobility controlling and oil displacement in the porous media.